BUSHING TOOL
.
This tool is designed to remove and replace shock eyelet bushings. The bushings are a press fit into the shock eyelets so this tool can be used in a vise, arbor press or with a soft headed hammer.

NOTE: THE 1/2 BUSHING TOOL NOW WORKS WITH THE CANE CREEK 14.7 BUSHING
*****
*****
The 1/2 inch Bushing Tool is machined 300 Series Stainless Steel to exacting tolerances to reduce tool wear - $25.00 (US) (Includes a pair of DU Bushings) - In Stock
*****
The 1/2 inch Bushing Tool and RWC Needle Bearing Tool is machined 300 Series Stainless Steel to exacting tolerances to reduce tool wear - $40.00 (US) (Includes a pair of DU Bushings) - In Stock
*****
If you currently own one of my 1/2 inch Bushing Tools and are migrating to the RWC Needle Bearing reducers then this Tool will work for you - $15.00 - In Stock
*****
The 12mm Bushing Tool is machined from 300 Series Stainless Steel to exacting tolerances then black anodized to reduce tool wear - $25.00 (US) (Includes a pair of DU Bushings) - In Stock
*****
*****
Flipnidaho has put together the perfect illustration on the intended use of this tool.
.
http://forums.mtbr.com/showthread.php?t=396483
.
.
USPS raised their rates in January so my shipping charges reflect that increase.
.
Shipping charges are as follows:

$3.50 - USA
$10.00 - Canada
$13.75 - World wide

*****
*****
DU BUSHINGS - In Stock
.
DU Bushing Type - Carbon Steel Backing with a PTFE (Teflon) and Lead/Bronze Wear Surface.
.
These dry bearings can meet the demanding criteria for long life and trouble-free performance with or without lubrication.
.
The DU Bushing cost is $3.00/pair (US)
.
--12mm DU Bushing which Fit – Answer Manitou (2007-2011), Rock Shox models (2007-2011 Bar, Ario, MC3, MC3R, and Pearl), and X-Fusion (2007-2010 Vector, O2, & Glyde) Shocks.
.
--1/2 inch DU Bushing which Fit – Fox, Cane Creek, Romic, Marzocchi Roco, Progressive 5th Element Coil, Rock Shox (2007-2011 Monarch and Vivid), 2007-2010 X-Fusion H3 Shocks, 2011 X-Fusion (Glyder, Vector and O2) Shocks, and 2012 X-Fusion O2 (RCX, RLX, & RL).
.
.
The DP4 Bushing cost is $5.00/pair (US)

DP4 Bushing Type - Carbon Steel Backing bonded to Sintered Bronze interlayer then overlaid with a PTFE (Teflon) Wear Surface.

--1/2 inch DP4 Bushing which Fit – Fox (All Models), Cane Creek (All Models), Romic, Marzocchi Roco, Progressive 5th Element Coil, Rock Shox (2007-2012 Monarch and Vivid), X-Fusion (2007-2010 H3), (2011 Glyder, Vector and O2), & (2012 O2 RCX, RLX, & RL) Shocks.
.
.
INSTALLATION NOTES:
.
Care must be taken to insert the bearing squarely into the housing to avoid damage to the lining material. A smear of oil may be applied to the housing bore to assist the fitting operation.
.
Even though the outer wear surface of bushing material is extremely durable when rubbing against a suitable shaft or thrust face, but care must be taken to ensure that the bearing material is not scratched or otherwise damaged by sharp projections before or during installation.

Check this link for a pictorial:

http://huckingkitty.com/forums/viewt...p?t=475&p=7982
.
USPS raised their rates in January so my shipping charges reflect that increase.
.
Shipping charges are as follows:

$3.50 - USA
$7.50 - Canada
$7.50 - World wide

.
I am a well-regarded seller on Ebay. Check out my reviews: http://myworld.ebay.com/mtnbiker4life/

.
Please specify what size Bushing Tool and DU Bushings you need upon contact.




.