Selling my Santa Cruz 5010 frame, fork, and some assorted parts.

Please see my ad on Pinkbike for plenty of high resolution pictures:

Frame is a 2016 CC carbon model, size large. I'm the original owner. The frame was fully taped in gloss finished Invisiframe protection from day 1 before it was built up. No dents anywhere in the frame. The Invisframe does have some scuffs here and there, and spots where the frame is not covered may have a few scuffs. Nothing bad however or out of the norm. Down tube is clean with no rock chips or dings. Frame and bike was well maintained, pivots greased regularly, fork lower oils changed regularly, etc. Frame does have rear Boost 148mm spacing.

Frame will also come with the following parts:

Upgraded shock, 2018 Fox Float X2 with climb switch. Shock is just back from Fox warranty due to the known cavitation problem, but has had a full rebuild along with the upgraded parts to prevent the cavitation again. (~$650 upgrade)

2015 Fox 36 fork, non-Boost, 100mm spacing. Fork is actually the more rare 170mm travel model that's been lowered. I also have 2 more negative plate spacers I will include if you want to lower it to 140 or 130mm. Fork was sent back late last spring to Fox for a full rebuild and overhaul, and has barely been ridden since then due to a house move and life getting in the way. Will come with a bunch of volume spacers and both the 15mm and 20mm axles. One stanchion does have a very small chip right at the top where the it presses into the crown, but Fox said it was not an issue, and is well past the fork bottom out point so won't affect performance. Stanchions perfect otherwise.

Fox 150mm Performance Transfer post (no lever included), very small sharpened pencil sized nick in the stanchion. Been that way forever, does not affect performance.
Cane Creek 110 headset
OneUp upper chainguide
Extra brand new Upper link with bearings, along with a brand new full bearing pack

(Full bike is pictured, however just to be clear only selling the frame and parts).

Asking $2950 plus shipping. Any questions please ask.

I will also be selling the Nox Farlow wheelset with the bike or if it sells. The Farlows are 29mm inner width, and built on Industry Nine hubs. Front wheel is built with Sapim X-ray spokes and brass nips, non-boost 100mm spacting. The rear is built with Sapim Race double butted spokes and brass nips, and is boost 148mm. Excellent condition, no dents/dings etc. Just a nick or two here and there on the rim from normal riding, rocks, etc. LMK if you are interested in the wheels with or without the frame and we can figure out a price.