Original owner. Custom build. Excellent mechanical and physical condition. Never crashed.

$2600. Will cover shipping above $50 to USA. Paypal accepted.

Size: Medium
Weight: 28.48lbs

This is a 2014 Intense Carbine 27.5/650b carbon fiber frame with an adjustable 135mm or 150mm of rear travel. Parts are 2015 or newer. Freshly tuned up.

150mm Rock Shox Pike RC fork w/ 1 token installed, no scratches on the stanchions.

Super smooth VPP linkage design; same design used in the Santa Cruz 5010 or Bronson.

Never crashed or mishandled. [former] mechanic owned and fully dialed.

Custom build with lots of upgrades. Very low miles on drivetrain.

This is a whole lot of bike for the price. I'd say it's very comparable to the SC 5010/Bronson in terms of ride feel. With the adjustable travel, you can go more Enduro or more Trail.

//

Build:

Frame: 2014 Intense Carbine 275 MED (135/152mm adjustable travel)
Fork - Rock Shox Pike RC 27.5 Solo Air 150mm (fresh lowers service)
Shock: Cane Creek DB Inline 2016 (volume spacers included)
Brakeset - SRAM Guide RS w/ SRAM Centerline rotors 180f/160r
Shift Levers - SRAM X1 11s rear
Rear Derailleur -SRAM X1 11s Type 2.1 clutch
Chain Guide: mrp 1x Direct Mount
Crankset: SRAM X1 175mm w/28t Blackspire N/W chainring
Bottom Bracket - SRAM GXP BB92 PressFit
Cassette - SRAM 1150 11s 10-42
Chain - SRAM 1110 (brand new w/powerlink)
Seatpost - Rock Shox Reverb Stealth 125mm 30.9 w/31.6 shim (properly-mounted remote: left-side, underbar)
Saddle - Sells Italia Trans Am C2 w/leather cover (new)
Handlebar - Ritchey WCS Trail low-riser - 740mm
Grips: Kona Slim Race
Stem - Ritchey WCS Trail 0-degree, 80mm
Headset - Chris King Inset3 Tapered Red annodized

Wheelset

Rims: Sun Helix TR27, set up tubeless w/valves
Tires: Maxxis High Roller II 3C/EXO 27.5x2.3
Hubset: front: Formula 15mm; rear: DT Swiss 350 w/36pt ratchet upgrade

Extras/Other:

- DT Swiss RWS 12x142mm rear axle
- Original Fox Float CTD rear shock; freshly serviced with new seals and float fluid
- Offset Bushing for rear shock: ~0.75° head angle adjustment, and ~3mm bottom bracket drop
- G1 dropout kit to convert back to 26" QR